FAG heating device
HEATER35
The FAG induction heating device
HEATER35 for rolling bearings is
suitable for bearings with bore
diameters of 70 mm (with accessories
15 mm) and over and weighing
up to 35 kg. This device can
also be used to heat sealed and
greased bearings and other rotationally
symmetrical steel parts.
The heating device has a sturdy,
scratch-resistant polyurethane
housing. It can be easily handled
thanks to its lateral handholds.
The two lateral supports carry the
slewing ledge. The part to be heated
can either be placed on the
round surface over the induction
coil or suspended from the horizontal
slewing ledge.
The contact surfaces of the slewing
ledge and the stands are ground so
that loss of power remains low.
The heating device can be connected
to any standard two-pin safety
socket which is protected by a 16 A
fuse.
The clearly structured control panel
with clear-cut symbols for the different
operating modes can also be
operated while wearing work gloves.
The touch keyboard is oil-resistant,
dustproof and waterproof. All
operating modes and functions can
be operated by means of five keys.
Induction heating devices
HEATER35
12
The device offers temperature control
and time control modes (see
page 5).
Additional functions
• Display of actual values for temperature
and time
• Temperature displayed in °C or °F
Accessories
For parts with a smaller bore diameter,
FAG supplies support ledges
and slewing sledges as special
accessories, see Technical Data.